| Customization: | Available |
|---|---|
| Type: | Corded Hot Melt Glue Gun |
| Glue Stick Length: | 12in |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description:
The glue gun module is an important part of the hot melt glue gun, which is used to control the flow rate and spraying pattern of the glue. The glue gun module usually includes the following key components:
1. Servo motor: Provides power to drive the glue gun.
Valve needle and valve sleeve: Adjust the flow rate and spraying pattern of the glue by rotating the valve needle.
2. Coupling: Connect the servo motor and the valve needle to ensure the transmission of power.
3. Material supply system: Responsible for the supply of glue.
Working principle of the glue gun module:
The working principle of the glue gun module is mainly to drive the valve needle to rotate through the servo motor. The rotation of the valve needle makes the hole section of the valve sleeve gradually taper or expand, thereby controlling the flow rate and spraying pattern of the glue. This design enables the glue gun to accurately control the amount of glue applied to meet the needs of different application scenarios. 12.
Different brands and models of glue gun modules
Common brands of glue gun modules on the market include NORDSON, whose modular design makes maintenance and replacement more convenient. For example, NORDSON's pneumatic spray gun module, hot melt glue gun module, etc. are widely used in various industrial automation equipment.
Methods for maintaining and replacing seals
When replacing seals, you need to follow the following steps:
1. Place the regulating valve on a stable plane.
2. Remove the motor.
3. Loosen the fixing bolts and pull the motor unit back.
4. Remove the pipe and remove the coupling.
5. Loosen the bolts and remove the plate, screw on the longer bolts to push the plate back from the other side.
6. Remove the plate and valve needle and check for wear.
7. Install a new seal assembly and replace the worn parts.
The working principle of the hot melt glue gun is to use the built-in electric heating device to heat the hot melt glue stick, make it melt and control the outflow of the melted glue through the trigger, so as to achieve the bonding effect.
){kind=link}